Convert Kilogram per meter second to Dyne second per square centimeter - Dynamic Viscosity

Convert Kilogram per meter second to Dyne second per square centimeter - Accurate Dynamic Viscosity Conversion Calculator

Kilogram per meter second

Enter a value and select units to convert.

Switch dyn·s/cm² to kg/(m·s)

Kilogram per meter second Unit Table

A list of units symbol and data.
From kg/(m·s)	To dyn·s/cm²	All conversion
1 kg/(m·s)	10 dyn·s/cm²
2 kg/(m·s)	20 dyn·s/cm²
3 kg/(m·s)	30 dyn·s/cm²
4 kg/(m·s)	40 dyn·s/cm²
5 kg/(m·s)	50 dyn·s/cm²
6 kg/(m·s)	60 dyn·s/cm²
7 kg/(m·s)	70 dyn·s/cm²
8 kg/(m·s)	80 dyn·s/cm²
9 kg/(m·s)	90 dyn·s/cm²
10 kg/(m·s)	100 dyn·s/cm²

Description

Kilogram per Meter Second (kg/(m·s)): A Fundamental SI Unit of Viscosity

The Kilogram per meter second (kg/(m·s)) is a fundamental SI unit of dynamic viscosity, representing the force in kilograms required to move a fluid layer over another with a velocity gradient of one meter per second across a one-meter gap.

This unit is integral in scientific and engineering calculations involving fluid flow, heat transfer, and material processing. It provides a direct measure of a fluid's resistance to deformation, crucial for designing systems where fluid behavior impacts performance.

Employing kg/(m·s) in calculations ensures consistency and accuracy in modeling and analyzing fluid dynamics across various applications.

Dyne Second per Square Centimeter (dyn·s/cm²): A CGS Unit of Viscosity

The Dyne second per square centimeter (dyn·s/cm²) is a unit of dynamic viscosity in the CGS system, equivalent to one Poise. It represents the force in dynes required to move a fluid layer over another with a velocity gradient of one centimeter per second across a one-centimeter gap.

While less common in modern applications, this unit is still encountered in specific scientific literature and historical data. Understanding this unit is crucial for interpreting legacy documents and conducting comparative analyses in fluid dynamics research.

Converting dyn·s/cm² to SI units involves multiplying by 0.1, yielding the equivalent value in Pascal seconds (Pa·s).

Complete list of conversion for Kilogram per meter second

Kilogram per meter second (kg/(m·s))

1 Kilogram per meter second = 1 Pascal second

Convert 2 kg/(m·s) → Pa·s

1 Kilogram per meter second = 1000 Millipascal second

Convert 2 kg/(m·s) → mPa·s

1 Kilogram per meter second = 10 Poise

Convert 2 kg/(m·s) → P

1 Kilogram per meter second = 1000 Centipoise

Convert 2 kg/(m·s) → cP

1 Kilogram per meter second = 10 Dyne second per square centimeter